通用输入,双色显示

输入: Thermocouple: K, J, R, S, E, T, N, PL-II, C (W/Re5-26) External resistance: 100Ω or less. B Thermocouple: External resistance: 40Ω or less. RTD: Pt100, JPt100 3-wire system, allowable input wire resistance (10Ω or less per wire). DC Current: 0 to 20 mA DC, 4 to 20 mA input impedance 50Ω (50Ω shunt resistor sold separately). DC Voltage: 0 to 1 VDC. Input Impedance: 1MΩ or greater.

输出额定: Relay Contact: 3A @ 250 VAC, Resistive: 1A @ 250 VAC inductive (CØS=0.4), Electric life 100,000 cycles. Switched Voltage (for SSR drive): 12 VDC @ 40 mA max. (short-circuit protected). DC Current: 4 to 20 mA DC, load resistance: max. 550Ω output accuracy: ±0.3% of output span. Resolution: 12,000 counts.

控制类型: P, PI, PD, PID, Self Tune, On-Off, Process Retransmission.

比例带: 0.0 to 110.0% (ON/OFF when set to 0.0).

积分常数: 0 to 1000 seconds (off when set to 0).

微分常熟: 0 to 300 seconds (off when set to 0).

比例循环: 1 to 120 seconds.

手动复位: Proportional band converted value.

输出限制: 0 to 100% (DC current output type: -5 to 105%).

滞后: Thermocouple and RTD Input: 0.1 to 100.0 degrees; DC Voltage and Current Input: 1 to 1000 (decimal point place follows the selection).

电源: 120-240 VAC, 50-60 Hz, 24 VAC 50-60 Hz optional.

功耗: Approximately 6VA.

精度: Thermocouple Input: ±0.2% of input span, ±1 digit or 4°F (2°C), whichever is greater. R, S Input: 0 to 400°F (0 to 200°C): ±6°C (12°F). B Input: 0 to 600°F (0 to 300°C): Accuracy is not guaranteed. K, J, E, N Input less than 32°F (0°C): ±4% of input span ±1 digit. RTD Input: ±0.1% of input span ±1 digit or ±2°F (1°C), whichever is greater. DC Voltage Input: ±0.2% of input span ±1 digit. DC Current Input: ±0.2% of input span ±1 digit.

输入采样间隔: 0.25 seconds, 4 Hz.

PV 显示: Red LED 4-digit character size: 7.5 x 4.1 mm (H x W).

SV 显示: Green LED 4-digit character size: 7.5 x 4.1 mm (H x W).

显示分辨率: 1 count, 1 degree, or 0.1 degree, depending on selected range.

记忆: Nonvolatile memory, no battery used.

环境温度: 32 to 131°F (0 to 50°C).

环境湿度: 35 to 85% RH (non-condensing).

重量: Approx. 5.3 oz (150 g).

认证: CE, UL, cUL.

型号	描述
SCZ10-1000-00	DIN rail mount temperature/process control, 120 to 240 VAC supply voltage, relay output.
SCZ10-2000-00	DIN rail mount temperature/process control, 120 to 240 VAC supply voltage, switched voltage output.
SCZ10-3000-00	DIN rail mount temperature/process control, 120 to 240 VAC supply voltage, current output.
SCZ10-3100-00	DIN rail mount temperature/process control, 24 VAC/DC supply voltage, current output.